All tools · page 133

Lists allowable and recommended dry bulb and humidity ranges by ASHRAE class.

Recommends RH and dew point setpoints from equipment class and climate inputs.

Converts temperature and relative humidity into dew point and absolute moisture.

Estimates enthalpy and wet bulb values from temperature and humidity readings.

Computes SHR from sensible and total cooling loads to flag latent issues.

Estimates free cooling hours and savings from climate temperature bins and load.

Sizes rear door heat exchanger capacity per rack from rack kW and airflow inputs.

Places in-row units along a row from rack kW profile and spacing rules.

Checks whether surviving in-row units cover row heat after a unit failure.

Rates a facility for direct liquid cooling from power, water and floor inputs.

Estimates coolant flow rate and captured heat for a direct-to-chip GPU rack.

Sizes immersion tank volume from device volume, fluid displacement and service space.

Plans CDU count and loop allocation from rack heat loads and secondary flow.

Evaluates supply air temperature choices against dew point and energy tradeoffs.

Computes required CFM from heat load and target supply return temperature split.

Estimates server fan power increase from inlet temperature rise inputs.

Flags hotspot racks from pasted inlet temperature readings against a target.

Converts thermal camera findings into prioritized airflow remediation tasks.

Sizes portable cooling tonnage for a closet or hotspot from load and duty cycle.

Plans condensate drain routing and trap details per cooling unit position.

Recommends CRAC positions and spacing from room dimensions and airflow pattern.

Flags recirculation paths from rack face, door and containment description input.

Estimates minutes to temperature threshold after cooling loss from thermal mass inputs.

Compares fixed versus tracking fan speed policies for energy and cooling risk.