All tools · page 132

Plans metering points from utility service down to rack PDU with roll-up structure.

Compares your kW per rack against industry benchmark ranges by facility type.

Computes demand charge savings from battery or generator contribution during peaks.

Recommends offline, line-interactive or double-conversion UPS from load criticality.

Computes hydrogen dilution airflow from float current and battery count.

Reads a battery runtime curve table and interpolates runtime at your load point.

Compares two tariffs against a pasted load profile for annual cost difference.

Ranks loads into shed tiers with kW per tier for capacity events.

Checks emergency power off placement, signage and guard requirements.

Compares commissioned kW against peak measured kW to output headroom per chain.

Projects when to add UPS modules from load growth rate and frame capacity.

Turns a facility power walk into a scored checklist of PDU, UPS and panel checks.

Converts IT load kW into cooling tons and BTU per hour with redundancy margin.

Sizes number and rating of CRAC units from total IT load and redundancy choice.

Computes GPM flow from cooling tons and supply return delta T.

Splits block IT load into chiller plant capacity with redundancy staging.

Compares unit counts needed for N, N+1 and 2N cooling at your load.

Scores hot aisle containment inspection points into pass, fix and not-applicable items.

Scores cold aisle containment items from doors and roof panels to sensor placement.

Compares hot and cold aisle containment on cost, retrofit effort and fire code factors.

Assigns alternating rack faces into hot and cold rows from your row list.

Estimates CFM lost to missing blanking panels, cutouts and unsealed floor openings.

Estimates delivered CFM per rack from tile open area, count and floor pressure.

Suggests perforated tile repositioning from a rack kW hotspot map input.