Datacenter & Hosting

Turns a device list with U sizes into a numbered rack elevation showing occupied and free units.

Adds device U heights against rack height to show remaining free units per rack.

Converts per-rack device watt totals into W per rack and W per square foot density figures.

Sums device weights per rack and flags rail and floor load limit breaches in kg or lb.

Converts used U and total U into a utilization percentage with over and under thresholds.

Lists zero-U gear like PDUs and UPS units to show how much rack space a build saves.

Compares device depths plus cabling allowance against rack depth for a fit verdict.

Assigns front-to-rear faces for each device to match hot and cold aisle direction.

Scans a pasted DCIM rack export for duplicate U positions and overlapping devices.

Maps cage dimensions and rack counts into row plans with aisle and clearance area totals.

Converts concentrated equipment weight over a tile into load per area against tile ratings.

Totals cutout counts and edge distances for cable and power cutouts per rack position.

Adds rack height, cable tray and top-of-rack gear to check clearance to ceiling and sprinklers.

Uses rack weight, anchor count and seismic zone to output anchoring bolt specs and spacing.

Explains bottom-up versus top-down numbering and outputs a U numbering reference table.

Stacks half-rack devices onto shared rails and shows full-rack U usage per side.

Picks a wall cabinet size from device count, depth and total weight with mounting verdict.

Compares room conditions against open frame and enclosed rack suitability criteria.

Builds a rack, RU and device label naming table from your site prefix rules.

Checks a pasted elevation CSV for missing fields, bad U values and unknown device types.

Finds largest contiguous free U blocks from an occupancy map and tests device fit.

Validates row depth and aisle widths from rack dimensions against common clearance rules.

Converts server and storage counts into estimated rack count and colo square footage.

Matches rack screw, cage nut and washer types like 10-32, M5 and M6 to rail systems.