All tools · page 188

Computes conduit fill and burial depth for outdoor runs.

Plans aerial fiber spans with clearance and tension basics.

Plans panel ports, adapters, and spare capacity per rack.

Plans PON split ratios and loss budgets per distribution point.

Plans ONT placement, power, and battery backup per unit.

Turns tester results into certification records per drop.

Checks separation from power and plenum ratings per pathway class.

Lists call-before-dig steps and ticket fields for trenching projects.

Builds panel port to switch port mapping tables.

Assigns 1, 6, and 11 across APs to eliminate co-channel overlap.

Builds a 20, 40, and 80 MHz reuse map with DFS flags.

Tables preferred scanning channels and 6E power rules.

Lists CAC, weather radar, and disruption steps for DFS channels.

Draws spectrum overlap for pasted AP channel assignments.

Computes AP count from area, client count, and wall attenuation classes.

Prepares survey gear, floor plans, and method notes before a walk.

Converts dBm readings into bars, percent, and quality classes.

Computes FSPL from frequency and distance with unit options.

Adds TX power and antenna gain against regional EIRP caps.

Computes downtilt angle from mount height and target cell radius.

Checks 60 percent Fresnel clearance for point-to-point links.

Computes fade margin for wireless bridge links from radio specs.

Converts PHY rate and protocol overhead into expected TCP throughput.

Tables 802.11n, ac, and ax MCS values with modulation and rates.