All tools · page 135
6,901 free tools across 25 categories. Tools marked with a lightning bolt are ready to use right now.
Generates cable label strings from your site, rack and port naming rules.
Lists 12 and 24 fiber color sequences with buffer and loose tube variations.
Lists 25-pair binder group colors with pair numbers for copper trunk work.
Plans MPO cassettes and panels from backbone strand counts and port needs.
Explains A, B and C polarity methods and picks one from your cassette types.
Recommends OM3, OM4, OM5 or OS2 from speed and distance inputs.
Lists reach limits by speed, transceiver class and fiber type in a matrix.
Picks Cat5e, Cat6, Cat6A or higher from speed and distance requirements.
Sums permanent link and patch cord losses into a channel dB margin verdict.
Lists minimum bend radii by cable type and diameter for trays and pulls.
Computes tray fill percent from cable diameters and tray size against code limits.
Computes conduit fill ratio and jam ratio from cable count and conduit size.
Counts horizontal and vertical cable managers needed from rack and panel list.
Sizes service loops per run type and lists storage point recommendations.
Computes maximum pull box spacing and bend allowances for a conduit run.
Estimates cable pulling tension from run length, bends and coefficient inputs.
Plans zone trunk counts and consolidation points from outlet density.
Lays out MDA, IDA and HDA positions from floor count and cable distance limits.
Chooses IDF count and positions from floor size and the 90 meter channel limit.
Totals cross connects and pairs needed from panel and system inputs.
Plans the carrier demarc extension run with pathway and termination notes.
Estimates inter-rack cable lengths from rack positions and a connection matrix.
Scores a run profile into a copper or fiber recommendation with reasons.
Recommends STP or UTP from an EMI source list and distance inputs.